RENOFORM 569

Home > Products > Product Review > Metalforming Lubricants > RENOFORM 569 >


Product Review

	Engine and Gear Oils

	Mould Release Agents

	Metalworking Fluids

	Metalforming Lubricants

		RENOFORM VB 360

		RENOFORM MBO 236

		RENOFORM HBO 962/2

		RENOFORM FW Series

		RENOFORM 702-461-AV

		RENOFORM 569

		RENOFORM 519-HT

		RENOFORM 51-DO

		RENOFORM 457

		RENOFORM 319-IS

		RENOFORM 1665/1

		TRENOIL S Series

		TRENOIL T Series

		TRENOIL SP Series


	Corrosion Preventives

	Quenching Oils

	Greases

	Industrial Lubricants

	Rapidly Biodegradable Lubricants

	Other products and services



Publication

Exhibitions

FUCHS for REACH - The new EU chemical law

EURO PI

RENOFORM 569

Neat drawing compound - chlorine- and sulphur-free

RENOFORM 569 is recommended for stamping, drawing and embossing operations and for chip-forming operations on nonferrous metals. Specially formulated for the manufacture of zippers, press studs, buttons and similar brass articles. RENOFORM 569 is also suitable for operations on ferrous metals if extraordinarily high lubricity is required. Furthermore, RENOFORM 569 can also be used as a lubricity improver and wetting agent for chip-forming operations on copper and copper alloys.

Advantages of using RENOFORM 569:

Excellent lubricity

Minimal tool wear

Suitable as a copper machining additive (add up to 20 % to neat cutting oils)

Simple removability (with mild alkalines, petroleum hydrocarbons or steam)

Application:

Suitable for use in central systems and individually-filled machines. Supplied ready to use.

Typical Physical & Chemical Characteristics

Properties	Unit	Value	Norm Test
Density at 15 °C	Kg/l	0.883	ASTM D 1298
Colour		2.0	ASTM D 1500
Viscosity at 40 °C	mm²/s	10	ASTM D 445
Flash point COC	°C	126	ASTM D 92
Pour point	°C	-9	ASTM D 97
Copper corrosion / 3 h - 20 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 24 h - 20 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 3 h - 50 °C	degree of corr.	1 b	ASTM D 130
Copper corrosion / 24 h - 50 °C	degree of corr.	1 b	ASTM D 130
Copper corrosion / 3 h - 100 °C	degree of corr.	1 b	ASTM D 130
Copper corrosion / 24 h - 100 °C	degree of corr.	1 b - 3 a	ASTM D 130
Four ball test / welding load	N	1800	ASTM D 2783
Reichert wear test	mm²	29.1	FLP*

FLP* = FUCHS Laboratory Procedure

Disclaimer of Liability