RENOFORM MBO 236

Home > Products > Product Review > Metalforming Lubricants > RENOFORM MBO 236 >


Product Review

	Engine and Gear Oils

	Mould Release Agents

	Metalworking Fluids

	Metalforming Lubricants

		RENOFORM VB 360

		RENOFORM MBO 236

		RENOFORM HBO 962/2

		RENOFORM FW Series

		RENOFORM 702-461-AV

		RENOFORM 569

		RENOFORM 519-HT

		RENOFORM 51-DO

		RENOFORM 457

		RENOFORM 319-IS

		RENOFORM 1665/1

		TRENOIL S Series

		TRENOIL T Series

		TRENOIL SP Series


	Corrosion Preventives

	Quenching Oils

	Greases

	Industrial Lubricants

	Rapidly Biodegradable Lubricants

	Other products and services



Publication

Exhibitions

FUCHS for REACH - The new EU chemical law

EURO PI

RENOFORM MBO 236

Neat drawing compound - chlorine- and sulphur-free, low misting

RENOFORM MBO 236 is recommended for all medium-difficulty stamping, drawing and embossing operations on all grades of steel. Furthermore, RENOFORM MBO 236 is also suitable for operations on nonferrous metals, aluminium and galvanized steels. This product can be used on material thicknesses of up to 6 mm. The remaining lubricant film provides many weeks of indoor corrosion protection and can be removed with all common industrial cleaners.

Advantages of using RENOFORM MBO 236:

Low-misting formulation

Excellent lubricity

Excellent corrosion protection

Minimal tool wear

Simple removability

Application:

RENOFORM MBO 236 can be applied by rolling, dipping or spraying. Supplied ready to use.

Typical Physical & Chemical Characteristics

Properties	Unit	Value	Norm Test
Density at 15 °C	Kg/l	0.897	ASTM D 1298
Colour		2.5	ASTM D 1500
Viscosity at 40 °C	mm²/s	68	ASTM D 445
Flash point COC	°C	272	ASTM D 92
Pour point	°C	-6	ASTM D 97
Copper corrosion / 3 h - 20 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 24 h - 20 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 3 h - 50 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 24 h - 50 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 3 h - 100 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 24 h - 100 °C	degree of corr.	1 a	ASTM D 130
Four ball test / welding load	N	1400	ASTM D 2783
Reichert wear test	mm²	23.5	FLP*

FLP* = FUCHS Laboratory Procedure

Disclaimer of Liability