Ecocut 700 Series

Home > Products > Product Review > Metalworking Fluids > Ecocut 700 Series >


Product Review

	Engine and Gear Oils

	Mould Release Agents

	Metalworking Fluids

		Ecocut HSG 900 Series

		Ecocut HSG 900 LE Series

		Ecocut HFN LE Series

		Ecocut CH 535

		Ecocut 700 Series

		Ecocut 700 LE Series

		Ecocut 600 Series

		Ecocut 600 LE Series

		Ecocut 3946 LE

		Ecocut 3000 Series

		Ecocut 3000 LE Series

		Ecocut 2534 C

		Ecocut 17 GD

		Ecocool SBSC

		Ecocool 007

		Ecocool D

		Ecocool BF 32 X

		Ecocool AP - 71

		Ecocool 905

		Ecocool 88

		Ecocool 68 CF 2

		Ecocool 6000

		Ecocool 4391

		Ecocool 3064

		Ecocool 2506 S

		Ecocool 22

		Ecocool 170 NA


	Metalforming Lubricants

	Corrosion Preventives

	Quenching Oils

	Greases

	Industrial Lubricants

	Rapidly Biodegradable Lubricants

	Other products and services



Publication

Exhibitions

FUCHS for REACH - The new EU chemical law

EURO PI

Ecocut 700 Series

Neat cutting oils for high performance cutting, chlorine-free, antimist

The Ecocut 700 series of products are designed as broaching oils, as deep hole drilling oils or for trepanning operations and for other cutting operations on extremely difficult-to-machine materials. The optimized heat transfer properties permit higher feed and cutting speeds.

Benefits of using Ecocut 700 Series

Outstanding antimist properties

Chlorine-free EP additives

Enhanced tool life

Excellent corrosion protection

Good cooling and lubrication

Application:

Recommended for central systems and individually-filled machines. Can be used on all belt type filter systems for machine tools. Use as supplied.

Typical Physical & Chemical Characteristics

ECOCUT		715	732	746
Properties	Unit	Value	Value	Value	Norm Test
Density at 15 °C	Kg/l	0.881	0.897	0.903	ASTM D 1298
Colour		2.0	2.0	2.5	ASTM D 1500
Viscosity at 20 °C	mm²/s	35	80	125	ASTM D 445
Viscosity at 40 °C	mm²/s	16	30	45	ASTM D 445
Flash point COC	°C	180	190	220	ASTM D 92
Copper corrosion / 3 h - 20 °C	degree of corr.	2 c	2 c	2 c	ASTM D 130
Copper corrosion / 24 h - 20 °C	degree of corr.	4 a	4 a	4 a	ASTM D 130
Copper corrosion / 3 h - 50 °C	degree of corr.	4 b	4 b	4 b	ASTM D 130
Copper corrosion / 24 h - 50 °C	degree of corr.	4 c	4 c	4 c	ASTM D 130
Copper corrosion / 3 h - 100 °C	degree of corr.	4 c	4 c	4 c	ASTM D 130
Copper corrosion / 24 h - 100 °C	degree of corr.	4 c	4 c	4 c	ASTM D 130
Oil mist index		2	2	1.5	FLP*
Evaporation loss	%	46	18	7	DIN 51 581-1

FLP* = FUCHS Laboratory Procedure

Disclaimer of Liability