Ecocool 88

Home > Products > Product Review > Metalworking Fluids > Ecocool 88 >


Product Review

	Engine and Gear Oils

	Mould Release Agents

	Metalworking Fluids

		Ecocut HSG 900 Series

		Ecocut HSG 900 LE Series

		Ecocut HFN LE Series

		Ecocut CH 535

		Ecocut 700 Series

		Ecocut 700 LE Series

		Ecocut 600 Series

		Ecocut 600 LE Series

		Ecocut 3946 LE

		Ecocut 3000 Series

		Ecocut 3000 LE Series

		Ecocut 2534 C

		Ecocut 17 GD

		Ecocool SBSC

		Ecocool 007

		Ecocool D

		Ecocool BF 32 X

		Ecocool AP - 71

		Ecocool 905

		Ecocool 88

		Ecocool 68 CF 2

		Ecocool 6000

		Ecocool 4391

		Ecocool 3064

		Ecocool 2506 S

		Ecocool 22

		Ecocool 170 NA


	Metalforming Lubricants

	Corrosion Preventives

	Quenching Oils

	Greases

	Industrial Lubricants

	Rapidly Biodegradable Lubricants

	Other products and services



Publication

Exhibitions

FUCHS for REACH - The new EU chemical law

EURO PI

Ecocool 88

Semi-synthetic Coolant for general machining

Ecocool 88 is a multi-functional, long-life-semi-synthetic product with low oil content. Ecocool 88 has been especially designed for use in soft water areas (process water hardness less than 200 ppm CaCO3). Ecocool 88 is recommended for general machining and grinding on ferrous and non-ferrous metals including cast iron.

Benefits of using Ecocool 88

Outstanding emulsion stability

Excellent corrosion protection

Excellent tramp oil rejection characteristics

Low foam levels

Enhanced tool life

Application:

Recommended concentrations:

- General machining	3-5%
- Difficult operations / materials	5-8%
- Grinding	2.5%

Typical Physical & Chemical Characteristics

Properties	Unit	Value	Norm Test
Density at 15 °C	Kg/l	1.061	ASTM D 1298
Colour		4.5	ASTM D 1500
Viscosity at 20 °C	mm²/s	11.1	ASTM D 445
Viscosity at 40 °C	mm²/s	6.6	ASTM D 445
pH-value of the emulsion / DIN water / 10%		9.2	DIN 51 369
pH-value of the emulsion / DIN water / 5%		9.1	DIN 51 369
Corrosion Test (chip/filter test) / 5%		0 - 0	IP 287
Foam Test (water hardness 3 °d) / 5%	minutes	11	AFNOR D65-5212
Foam Test (water hardness 15 °d) / 5%	minutes	135	AFNOR D65-5212
Reserve Alkalinity up to pH = 7	ml 0.1 n HCl	147	FLP*
Reichert wear test / DIN water / 5%	mm²	27.7	FLP*
Refractometer / Fluid Tester factor		1.6	FLP*

FLP* = FUCHS Laboratory Procedure

Disclaimer of Liability