Ecocool 22

Home > Products > Product Review > Metalworking Fluids > Ecocool 22 >


Product Review

	Engine and Gear Oils

	Mould Release Agents

	Metalworking Fluids

		Ecocut HSG 900 Series

		Ecocut HSG 900 LE Series

		Ecocut HFN LE Series

		Ecocut CH 535

		Ecocut 700 Series

		Ecocut 700 LE Series

		Ecocut 600 Series

		Ecocut 600 LE Series

		Ecocut 3946 LE

		Ecocut 3000 Series

		Ecocut 3000 LE Series

		Ecocut 2534 C

		Ecocut 17 GD

		Ecocool SBSC

		Ecocool 007

		Ecocool D

		Ecocool BF 32 X

		Ecocool AP - 71

		Ecocool 905

		Ecocool 88

		Ecocool 68 CF 2

		Ecocool 6000

		Ecocool 4391

		Ecocool 3064

		Ecocool 2506 S

		Ecocool 22

		Ecocool 170 NA


	Metalforming Lubricants

	Corrosion Preventives

	Quenching Oils

	Greases

	Industrial Lubricants

	Rapidly Biodegradable Lubricants

	Other products and services



Publication

Exhibitions

FUCHS for REACH - The new EU chemical law

EURO PI

Ecocool 22

Semi-synthetic coolant for general machining

General purpose, biostable micro-emulsion designed for multi-purpose use on steel and cast iron.
Ecocool 22 contains no silicones, phenois or nitrites.

Benefits of using Ecocool 22

Excellent corrosion protection

Long-life, stable emulsions

No skin irritation in usual conditions

Application:

For all machining and grinding operations of steel and cast iron. Recommended concentration depends upon the machining operation and the material to be machined and is between 3% and 6%. Ecocool 22 is usually filtered through nylon or paper. Used Ecocool 22 can be split with aluminium
sulphate, strong acids or ultra filtration.

Typical Physical & Chemical Characteristics

Properties	Unit	Value	Norm Test
Density at 15 °C	Kg/l	1.075	ASTM D 1298
Colour		5.5	ASTM D 1500
Viscosity at 20 °C	mm²/s	66	ASTM D 445
Viscosity at 40 °C	mm²/s	32	ASTM D 445
pH-value of the emulsion / DIN water / 10%		9.3	DIN 51 369
pH-value of the emulsion / DIN water / 5%		9.2	DIN 51 369
Corrosion Test (chip/filter test) / 5%		0 - 0	IP 287
Foam Test (water hardness 3 °d) / 5%	minutes	33	AFNOR D65-5212
Foam Test (water hardness 15 °d) / 5%	minutes	300/300	AFNOR D65-5212
Reserve Alkalinity up to pH = 7	ml 0.1 n HCl	208	FLP*
Reichert wear test / DIN water / 5%	mm²	22.4	FLP*
Refractometer / Fluid Tester factor		1.7	FLP*

FLP* = FUCHS Laboratory Procedure

Disclaimer of Liability