RENOCAST STANDARD

Home > Products > Product Review > Mould Release Agents > RENOCAST STANDARD >


Product Review

	Engine and Gear Oils

	Mould Release Agents

		RENOCAST STANDARD

		RENOCAST PERFECT

		RENOCAST DES 8

		RENOCAST 121

		PLANTOMOULD N / S


	Metalworking Fluids

	Metalforming Lubricants

	Corrosion Preventives

	Quenching Oils

	Greases

	Industrial Lubricants

	Rapidly Biodegradable Lubricants

	Other products and services



Publication

Exhibitions

FUCHS for REACH - The new EU chemical law

EURO PI

RENOCAST STANDARD

Mould release agent

RENOCAST STANDARD is a chemically-physically reacting mould release agent suitable for absorbing and non-absorbing moulds made of wood, coated chipboard, steel, etc.

Suitable for temperatures up to 100°C (mould temperature).
If used correctly, it does not interfere with plaster, bonding agents or paint coatings.
RENOCAST STANDARD is free of wax and silicone.
Contains pore-eliminating additives.
The film acts as a temporary rust preventive for steel moulds.
RENOCAST STANDARD protects building machinery.
RENOCAST STANDARD is solvent-free. It preserves wood protecting it from rotting and mould fungi, etc.
Acc. to the OECD Screening Test RENOCAST STANDARD is generally rapidly biodegradable.

Application:

A thin and even coat should be applied with a brush or suitable spraying equipment (e.g. Teejet nozzle SS 800067) to the clean and dry form.
About 1 litre will treat 20-30m² of non-absorbing surface and 10-20 m² of absorbing surface.
Must not be diluted with water, oil or solvents. RENOCAST STANDARD is ready-to-use!
Frost-resistant down to -10°C. If the product thickens at low temperatures, simply heat to return to the normal condition.
Perform a compatibility check prior to use, because local conditions and material variations can influence finished surface qualities and consumption.

Characteristics:		Test method
Appearance	liquid, clear
Colour	pale straw
Kinematic viscosity at 20 °C	15 mm²/s	DIN 51 562
Density at 20 °C	840 kg/m³	DIN 51 757

Safety information:

Observe local water regulations.
Avoid open flames.
Do not smoke.
Do not inhale spray mist.
Avoid skin and eye contact.
Change product-soaked clothing.
Observe industrial hygiene regulations.

Disclaimer of Liability