RENOFORM 319-IS

Home > Products > Product Review > Metalforming Lubricants > RENOFORM 319-IS >


Product Review

	Engine and Gear Oils

	Mould Release Agents

	Metalworking Fluids

	Metalforming Lubricants

		RENOFORM VB 360

		RENOFORM MBO 236

		RENOFORM HBO 962/2

		RENOFORM FW Series

		RENOFORM 702-461-AV

		RENOFORM 569

		RENOFORM 519-HT

		RENOFORM 51-DO

		RENOFORM 457

		RENOFORM 319-IS

		RENOFORM 1665/1

		TRENOIL S Series

		TRENOIL T Series

		TRENOIL SP Series


	Corrosion Preventives

	Quenching Oils

	Greases

	Industrial Lubricants

	Rapidly Biodegradable Lubricants

	Other products and services



Publication

Exhibitions

FUCHS for REACH - The new EU chemical law

EURO PI

RENOFORM 319-IS

Semi-synthetic cold forming lubricant, chlorine-free

RENOFORM 319-IS is an extreme pressure lubricant suitable for difficult cold forming operations on cold headers and cold part formers. RENOFORM 319-IS is intended for those operations which generate excessive heat. It provides lubrication which minimizes smoking, staining and varnishing of the lube oil on the parts. RENOFORM 319-IS is inhibited against corrosion of copper and copper alloys and is suitable for use both as a machine lubricant and a die lubricant in nearly all cold parts formers.

Benefits of using RENOFORM 319-IS:

Provides extreme pressure lubrication to prevent metal pick-up on tooling

Excellent heat carry-off properties allows parts to run cooler

Semi-synthetic composition resists oxidation and varnishing of lubricant on the parts

Residual films remain oily and are easily cleaned in most conventional cleaning systems

Inhibited against corrosion of copper and copper alloys

Non hazardous to use - contains no toxic ingredients

Application:

Can be applied directly to the wire or rod on small one and two die headers. Should be flowed directly on the dies and punches on large headers or parts formers. Can be diluted with blending oil for less difficult operations.

Typical Physical & Chemical Characteristics

Properties	Unit	Value	Norm Test
Density at 15 °C	Kg/l	0.932	ASTM D 1298
Colour		>8.0	ASTM D 1500
Viscosity at 40 °C	mm²/s	68	ASTM D 445
Flash point COC	°C	>232	ASTM D 92
Copper corrosion / 3 h - 20 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 24 h - 20 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 3 h - 50 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 24 h - 50 °C	degree of corr.	1 a	ASTM D 130
Copper corrosion / 3 h - 100 °C	degree of corr.	1 b	ASTM D 130
Copper corrosion / 24 h - 100 °C	degree of corr.	2 b	ASTM D 130
Four ball test / welding load	N	3600	ASTM D 2783
Reichert wear test	mm²	2.9	FLP*

FLP* = FUCHS Laboratory Procedure

Disclaimer of Liability