ANTICORIT DFO

Home > Products > Product Review > Corrosion Preventives > ANTICORIT DFO >


Product Review

	Engine and Gear Oils

	Mould Release Agents

	Metalworking Fluids

	Metalforming Lubricants

	Corrosion Preventives

		ANTICORIT RP4107 S

		ANTICORIT PL3802 LV

		ANTICORIT OHK

		ANTICORIT MKR

		ANTICORIT DFW

		ANTICORIT DFO

		ANTICORIT DF

		ANTICORIT BW 366

		ANTICORIT 6120/42

		ANTICORIT 5012 S

		ANTICORIT 03 W-C


	Quenching Oils

	Greases

	Industrial Lubricants

	Rapidly Biodegradable Lubricants

	Other products and services



Publication

Exhibitions

FUCHS for REACH - The new EU chemical law

EURO PI

ANTICORIT DFO

Corrosion Protection Oil and Dewatering Fluid

ANTICORIT DFO is a corrosion preventive and dewatering fluid which forms a very thin, oily film.
ANTICORIT DFO offers excellent corrosion protection, intensive dewatering properties, stability against dragged-in acids and alkalines along with being extremely economical.

ANTICORIT DFO is recommended for the rapid drying and simultaneous protection of metal components and tools; after galvanizing and washing processes for the interim and long-term protection of bare metal surfaces.

Application:

Normally by dipping but if such facilities are not available ANTICORIT DFO can be sprayed. However, all precautions applicable to solvent-based products should be observed. If necessary, please consult the corresponding Material Safety Data Sheet.
If sealed in the original container, ANTICORIT DFO can be stored for min. 5 years at 5-40 °C.

Characteristics:

Properties	Unit	Value	Test method
Colour		3	ASTM D 1500
Flashpoint	°C	40	ASTM D 56
Density at 15 °C	kg/l	0.810	ASTM D 1258
Viscosity at 20 °C	mm²/s	2.3	ASTM D 445
Film weight	g/m²	0.5	FLP-F 3 *)
Evaporation residue	%	19	FLP-V 1 *)
Corrosion Protection Data (on RRSt. 1405 m test panels)
Humidity cabinet	hours	120	ASTM D 1748
Salt spray test	hours	8	ASTM B 117
Condensation climate	cycles	10	DIN 50 017 KFW

*)	= FUCHS Laboratory procedure

Disclaimer of Liability