ANTICORIT 6120/42

Home > Products > Product Review > Corrosion Preventives > ANTICORIT 6120/42 >


Product Review

	Engine and Gear Oils

	Mould Release Agents

	Metalworking Fluids

	Metalforming Lubricants

	Corrosion Preventives

		ANTICORIT RP4107 S

		ANTICORIT PL3802 LV

		ANTICORIT OHK

		ANTICORIT MKR

		ANTICORIT DFW

		ANTICORIT DFO

		ANTICORIT DF

		ANTICORIT BW 366

		ANTICORIT 6120/42

		ANTICORIT 5012 S

		ANTICORIT 03 W-C


	Quenching Oils

	Greases

	Industrial Lubricants

	Rapidly Biodegradable Lubricants

	Other products and services



Publication

Exhibitions

FUCHS for REACH - The new EU chemical law

EURO PI

ANTICORIT 6120/42

Corrosion Protection Oil

ANTICORIT 6120/42 is a low-viscosity, mineral oil based corrosion protection of which forms a colourless, non- resinating, oily-thixotropic film offering excellent protection.

ANTICORIT 6120/42 is easily removed with neutral or alkaline water-based cleaners.

ANTICORIT 6120/42 is recommended for the transport and storage protection of finished and semi-finished steel components such as profiles, tubes, strips, wire and all types of spare parts.

Application:

ANTICORIT 6120/42 can be applied by dipping, spraying or rolling. Relevant safety procedures should be observed when spraying.
If sealed in the original container, ANTICORIT 6120/42 can be stored for min. 5 years at 5-40 °C.

Characteristics:

Properties	Unit	Value	Test method
Colour		4.0	ASTM D 1500
Flashpoint	°C	63	ASTM D 93
Density at 15 °C	kg/l	0.869	ASTM D 1298
Viscosity at 40 °C	mm²/s	7	ASTM D 445
Film weight	g/m²	4.0	FLP-F 3 *)
Corrosion Protection Data (on RRSt. 1405 m test panels)
Humidity cabinet	hours	168	ASTM D 1748
Condensation climate	cycles	20	DIN 51 386-1
Salt spray test	hours	24	ASTM B 117

*)	= FUCHS Laboratory procedure

Disclaimer of Liability