THERMISOL QH 120

Home > Products > Product Review > Quenching Oils > THERMISOL QH 120 >


Product Review

	Engine and Gear Oils

	Mould Release Agents

	Metalworking Fluids

	Metalforming Lubricants

	Corrosion Preventives

	Quenching Oils

		THERMISOL QH 40

		THERMISOL QH 120

		THERMISOL QH 10

		THERMISOL BMP

		THERMISOL 251


	Greases

	Industrial Lubricants

	Rapidly Biodegradable Lubricants

	Other products and services



Publication

Exhibitions

FUCHS for REACH - The new EU chemical law

EURO PI

THERMISOL QH 120

High Performance Quenching Oil

Diagram

THERMISOL QH 120 is a thermally stable, high performance Quenching Oil with a high flashpoint and very low evaporation losses. The product offers rapid cooling and contains anti-ageing additives.
THERMISOL QH 120 should be used when local stress avoidance and good hardness is required from a Quenching Oil with very rapid cooling properties and extremely low evaporation losses.

Benefits of using THERMISOL QH 120

Free of asphalt and completely neutral

Surfaces remain free of any deposits after quenching

Not hazardous according to the law on hazardous substances

Free of chlorine and PCB, thus ensuring simple and cheap disposal

Typical Physical & Chemical Characteristics:

Properties	Unit	Value	Norm Test
Colour		2.0	ASTM D 1500
Density at 15 °C	kg/l	0.882	ASTM D 1298
Viscosity at 20 °C	mm²/s	420	ASTM D 445
Viscosity at 40 °C	mm²/s	122	ASTM D 445
Viscosity at 100 °C	mm²/s	13	ASTM D 445
Flashpoint COC	°C	252	ASTM D 92
Pourpoint	°C	-4	ASTM D 97

Application:

THERMISOL QH 120 can be used in open and closed facilities such as multipurpose furnaces and vertical retort facilities.

THERMISOL QH 10 is normally used at temperatures between 60 °C and 160 °C and up to 190 °C under inert gas. In general, temperatures up to 150 °C are sufficient to produce a quenching effect.

Disclaimer of Liability