ANTICORIT BW 366 is a touch-dry, waxy corrosion preventive containing a Hazard Category A II white spirit solvent. ANTICORIT BW 366 has thixotropic properties which prevents the film running-off vertical surfaces.
ANTICORIT BW 366 is recommended as an underbody and cavity sealant as well as for the long-term, indoor, open-shed and outdoor protection of semi-finished, pressed and cast components.
ANTICORIT BW 366 is also suitable for the protection of laid-up vehicles and machinery in the construction and agricultural industries.
Application:
ANTICORIT BW 366 can be applied by dipping, spraying or rolling. However, all precautions applicable to solvent-based products should be observed when spraying.
If necessary, please consult the corresponding Material Safety Data Sheet.
ANTICORIT BW 366's thixotropic properties may cause slight thickening after longer periods of storage. The original viscosity can be restored by stirring.
If sealed in the original container, ANTICORIT BW 366 can be stored for min. 5 years at 5-40 °C.
Characteristics:
Properties
Unit
Value
Test method
Colour
 
brown
 
Flashpoint
°C
40
ASTM D 56
Density at 15 °C
kg/l
0.875
ASTM D 1258
Film weight
g/m²
50
FLP-F 3 *)
Evaporation residue
%
55
FLP-V 1 *)
Run-out time at 20 °C
s
60
 
Drying time
min
60
 
Corrosion Protection Data (on RRSt. 1405 m test panels)