Impressum   Anfahrtsplan   Kontakt   Sitemap   Fuchs weltweit   English
			Über unsInvestor RelationsPresseCorporate GovernanceProdukteMotorsportServiceJobs & Karriere
				Home > Produkte > Produktübersicht > Umformschmierstoffe > RENOFORM 457 >
	Produktübersicht Motoren- und Getriebeöle Schal- und Trennmittel Kühlschmierstoffe Umformschmierstoffe RENOFORM VB 360 RENOFORM MBO 236 RENOFORM HBO 962/2 RENOFORM FW Series RENOFORM 702-461-AV RENOFORM 569 RENOFORM 519-HT RENOFORM 51-DO RENOFORM 457 RENOFORM 319-IS RENOFORM 1665/1 TRENOIL S Serie TRENOIL T Series TRENOIL SP Serie Korrosionsschutzmittel Härteöle / Abschreckmedien Schmierfette Industrieöle Biol. schn. abbaub. Schmierstoffe Sonst. Produkte / Servicebereiche Berichte Publikationen Messen & Termine FUCHS für REACH - Das neue europäische Chemikalienrecht EURO PI
				RENOFORM 457 Cold forming lubricant, chlorine-free, dual purpose RENOFORM 457 is a chlorine-free, EP cold forming lubricant which can perform many difficult cold forming operations. RENOFORM 457 is especially formulated to be non-corrosive to copper and copper alloys. This means that it can be used on both sides of the machine, the die side and the machine lubricant side. Two important advantages are: It ends the problem of contaminating the machine lubricant with die lubes which can be corrosive to non-ferrous bearings. Dilution of the die lube by machine lubes causes changes in viscosity and EP content of the die lube. When RENOFORM 457 is used in both ends of the machine, this will not occur and potential tooling problems will be avoided. Benefits of using RENOFORM 457: Provides EP lubrication to prevent metal pick-up on tooling Suitable for a wide variety of cold forming operations Dual purpose - can be used as both a die lubricant and a machine lubricant Good heat removal properties Easily cleaned in most conventional cleaning systems Non hazardous to use - contains no toxic ingredients Application: Die Lubricant: Normally used as supplied. Can be applied directly to the wire or rod on small one and two die headers. Should be flowed directly on the dies and punches on large headers or parts formers. Can be diluted with blending oil for less difficult operations. Machine Lubricant: Always use as supplied. Typical Physical & Chemical Characteristics Properties Unit Value Norm Test Density at 15 °C Kg/l -0.939 ASTM D 1298 Colour   >8.0 ASTM D 1500 Viscosity at 40 °C mm²/s 69 ASTM D 445 Flash point COC °C 168 ASTM D 92 Copper corrosion / 3 h - 20 °C degree of corr. 1 a ASTM D 130 Copper corrosion / 24 h - 20 °C degree of corr. 1 a ASTM D 130 Copper corrosion / 3 h - 50 °C degree of corr. 1 a ASTM D 130 Copper corrosion / 24 h - 50 °C degree of corr. 1 a ASTM D 130 Copper corrosion / 3 h - 100 °C degree of corr. 1 a ASTM D 130 Copper corrosion / 24 h - 100 °C degree of corr. 3 b ASTM D 130 Four ball test / welding load N 7500 ASTM D 2783 Reichert wear test mm² 3.8 FLP* FLP* = FUCHS Laboratory Procedure   Haftungsausschluß	Aktuell   Pressemitteilung vom 9.12.2008   Dreivierteljahresbericht und         drittes Quartal 2008   Aktienrückkaufprogramm   Neueste Researchberichte   Neueste Empfehlungen   Finanznachrichten Anpfiff ins Leben - Das FUCHS Paten-Team Die FUCHS PETROLUB AG unterstützt Jugendmannschaften des SV Waldhof. Weitere Informationen finden Sie hier:   Das FUCHS Paten-Team S-Box Metropolregion Rhein-Neckar Performance-Index Hier finden Sie den Link    S-Box Metropolregion Rhein-Neckar          Performance-Index Unsere Filmecke   Der gläserne Stoßdämpfer         Bericht des Campus TV im         Rhein-Neckar-Fernsehen         Film          Film (Windows Media Player)            FUCHS Hauptversammlung         Film HV (Windows Media Player)         Film HV (Apple Quick Time)        Termine  Finanzkalender 27.3.2009 Bilanzpressekonferenz, Mannheim  Terminerinnerung Motorsport FUCHS SHOP Der FUCHS Shop ist vom 22.12.2008 - 5.1.2009 geschlossen. Wir haben ab 7.1.2009 wieder geöffnet: Montag bis Freitag jeweils 11.00 - 12.30 Uhr und 13.30 - 15.00 Uhr Für gewerbliche Kunden in Deutschland